Pipes for drip irrigation
Suleyman - Stalin Polymer Pipe Plant
Production
On the territory of the Republic of Dagestan, p. Orta-Stal plans to open the largest polymer pipe plant in the North Caucasus Federal District, in the region with the lowest growth rate of polymer production.
80 000
AREA OF ENTERPRISE
m²
MACHACHALA
DERBENT
C. ORTA-STAL
Development
The technological and production complex will provide 250 jobs:
OWN LABORATORY
for testing incoming raw materials and products for compliance with GOST and TU
TRAINING CENTER
for training qualified personnel
GARAGE CORPUS
for own fleet of trucks
FORMER CORPUS
for year-round residence of employees in the territory
10 production lines
equipped with the latest equipment from leading manufacturers Beier, ZhongYun and HaiTian. All products are manufactured in accordance with GOST and TU
Products
Polyethylene pressure pipes HDPE for water supply with diameter
110-1200 mm
HDPE Polyethylene pressure pipes for gas supply with diameter
110-315 mm
HDPE Smooth Cove Pipes for Diameter Water Supply
16-110 mm
Pipes HDPE corrugated double-wall diameter
100-1200 mm
Helical diameter pipes
1000-2400 mm
Drip irrigation pipes with built-in emitter diameter
16 mm
Drip irrigation
In drip irrigation, together with moisture, plants receive micro and macro elements directly into the root system, and the root layer receives optimal aeration.
When drip irrigation is used, the interrows remain dry, which allows weeding, tilling or harvesting at the same time.
Drip irrigation has a positive effect on the soil itself - water erosion, leaching and salinization of the soil is reduced.
Drip irrigation Suitable for all crops
Especially popular is the cultivation of those crops that do not accept the irrigation of leaves - tomatoes, eggplant, sweet peppers, squash, etc.
Also drip irrigation significantly improves the performance of crops in a dry climate - grapes, watermelons, melons.
Suitable for crops in arid climates
for crops that do not tolerate the irrigation of leaves
Production of drip irrigation pipes
A drip irrigation tube with built-in emitters is a thick-walled tube made of high-quality HDPE, in which emitters (droppers) are built with a certain step to uniformly supply water with a specified flow rate.
The regulation of water pressure is due to a special labyrinth inside the emitter (dropper), which creates a turbulent flow inside the device and prevents the free flow of water.
Drip irrigation tubes have increased flexibility and resistance to conditions of increased insolation due to the addition of polymer applications at the manufacturing stage. This provides a multi-year uniform watering due to the increased strength of the products.
Production line for drip irrigation pipe with built-in emitter ?16 mm
Scope of application
Industrial agriculture
Landscape gardening
Private or private subsidiary
Greenhouse or open ground
care for green spaces
for watering beds, flower beds and gardens
Fruit and Berry Gardens
Private or Industrial Purposes
Ornamental crop
nurseries of seedlings, plants and fruit crops
Advantages of using products
Efficiency of water consumption during irrigation due to the lack of additional evaporation and loss of water
No sunburn on the leaves of irrigated plants - water is supplied directly to the root system
Reducing the spread of weed through selective root watering
Advantages of using products
Increased flexibility to form the necessary geometry of the drip line
Prevents soil moisture
Ability to operate at low water pressure
Preserves soil structure, prevents erosion
Advantages of using products 60
Uniform irrigation along the entire length without formation of a jet
%
Water saving
Resistance to temperature fluctuations - do not require cleaning for the winter
Compared to rain irrigation
High resistance to UV radiation and conditions of increased insolation
High cracking resistance
No physical costs when watering and con-trol by volume of watering
Environmental safety during installation and operation
The principal scheme of planting grapes
5 meters (between rows) x 2-3 meters (between seedlings depending on the grape variety)
5 meters (between rows) x 2 meters (between seedlings)
5 meters (between rows) x 2,5 meters (between seedlings)
5 meters (between rows) x 3 meters (between seedlings)
stub
Water tank or water supply
Hose
Crane
Stand
stub
5 m
2-3 m
stub
Installation method
Overground Laying of irrigation tube near seedlings and plants at the required distance
Soil Depth Bookmark - from 50 mm up to 60 mm in the planned root zone of the seedling or plant
Specification: drip irrigation pipes
Diameter 16 mm
Wall thickness from 0,7 to 1,2 mm
Pressure 1 - 3 bar
Type of drip emitter uncompensated
The step of emitters is set individually to order: from 200 mm to 5000 mm
Water consumption (by 1 Emitter): 2,2 l/h
Number of meters in the bay from 100 to 500
Denis Kaziev
Head of Sales
TEL. +7 (932) 090 00 02 SALE@EXONOR.RU
Republic of Dagestan, Suleyman - Staly district, p. Orta-Stal, st. Topoleva d.1.